Product Finder

Vcap Certified

NTEP - National Conference on Weights and Measures

Made in USA
Made in USA

© Copyright 2018
Group Four Transducers Inc
The G800-EIP Industrial Weighing Indicator is designed to fulfill measurement and control requirements in harsh industrial environments.

G800-EIP Industrial Weighing Indicator

Compared to the weighing precision of typical weighing indicators, the high precision and outstanding electromagnetic compatibility of the G800-EIP weighing terminal enable it to better fulfill measurement and control applications in harsh industrial environments. Thanks to its SMT design, the G800-EIP weighing terminal consumes less power and is more compact, allowing it to be panel mounted into to a control cabinet.

From an analog output to industrial Fieldbus to Ethernet, the G800-EIP provides a wide variety of interface options. It can seamlessly connect with many types of PC’s, PLC’s, and DC’s. Its digital communication interface provides direct, high-speed control for a variety of applications such as packaging, filling, dynamic weighing and discharging.

The G800-EIP can be transparently controlled by a PLC or a PC for remote configuration and calibration. Its six-wire load cell interface compensates for signal loss due to long cable runs (up to 300m).

Download PDF »


  • Compact / low cost.
  • Multiple control modes.
  • Many reliable data interfaces are supported.
  • F.I.R. Digital Band Filter.
  • ARM DSP.
  • Fast A/D Conversion up to 1000Hz.
  • Super Bright OLED Display - No High / Low Temperature Blackout.
  • Wide Range of Optional Communication Boards.


  • Packaging, filling, dynamic weighing and discharging.



RS-232 serial communication.

  • Continuous or demand output formats.
  • Popular communication protocol is supported.
  • Remote zero and tare functions are supported.
  • All interfaces feature ESD protection.

RS-485 serial bus communication.

  • Baud rate: 2400 to 115200 bps (selectable).
  • Communication response time < 5 ms.
  • Indicator always used as a slave.
  • Supports MODBUS RTU slave protocol.

Analog Output.

  • Support multiple analog output, such as 0~10V, 0~5V, 4~20mA, 0~24mA multiple output formats.
  • 16-bit D to A conversion (1/32767).
  • Fully adjustable via front keypad.

10/100M Industrial Ethernet Interface.

  • Connect with PC or PLC through network switch
  • Standard RJ45 interface, with Internet status indication
  • Communication speed 10/100, supports multiple sub stations
  • Simple, easy-to-use TCP/UDP protocol.


  • Displayed graduations: 100 to 100,000 (selectable)
  • AD sampling frequency of 10~1000HZ can be set,a variety of data filtering Options can be selected to meet the dynamic / static requirements of different applications.
  • Remote or local zero, tare and calibration function.

Set Point outputs.

  • AD sampling frequency of 10~1000HZ can be set, a variety of data filtering options can be selected to meet the dynamic / static requirements of different applications.
  • Set point output thru internal relays.
  • Set point is defined as the result of a preset value compared to the displayed weight.

High/Low Alarm.

  • Set high high/high/low/low low values via keypad.
  • Internal relays can control the output warning signal.
  • Supports Silo material filling.
  • Some models only support 3 alarm points.

Simple fixed value and feeding control automatically.

  • Supports fixed value feeding and discharging.
  • Two set points (via keyboard).
  • Manually select material type.
  • Internal relay control.
  • Supports fully automatic or semi-automatic batching of up to four types of material.
  • Choose single or double speed control for each kind of material.
  • Automatically adjusts the feeding and discharging material resolution.
  • Manually set input/output control function.